News articles
|
Common Problems with Jaw Crusher Jaw PlatesThe jaw plate, often simply referred to as the "jaw," is a wear part in a jaw crusher. It is divided into the fixed jaw plate and the movable jaw plate. During operation, the movable jaw, equipped with its plate, performs a complex swinging motion. This action creates an angle with the fixed jaw plate to compress and crush the rock. Consequently, jaw plates are among the components most prone to wear in a jaw crusher. So, what are the frequent issues encountered with jaw plates during operation?
1. Improper Fit Between Jaw Plate and Machine Surface:Newly installed jaw plates must be securely fastened and should fit flush against the machine's surface. To ensure a stable fit, a layer of malleable material can be shimmed between the jaw plate and the machine surface.
2. Unadjusted Crusher Settings for Changing Material Properties:The properties of each batch of feed material should be spot-checked. If significant changes in material characteristics are detected, the crusher parameters must be adjusted promptly to match the new feed. Additionally, jaw plates should be made of materials with high hardness, strong wear resistance, and excellent impact strength.
3. Excessive RPM of the Eccentric Shaft:If the eccentric shaft rotates too quickly, already-crushed material cannot be discharged in time, leading to a choked crushing chamber and accelerated jaw plate wear. Worn jaw plates can be restored using hardfacing (build-up welding) techniques.
The points above represent common issues with jaw crusher jaw plates. The key to minimizing downtime is to address any problems promptly and effectively when they arise. |