News articles
|
Cone Crusher Main Shaft Fracture: Causes and SolutionsMain Causes of Cone Crusher Main Shaft Fracture:
1. Due to the unique working characteristics of the crusher, the main shaft is subjected to frequent mechanical impacts over the long term, leading to fatigue damage. 2. Excessive feeding causes the equipment to operate under overload conditions.
During the mining and transportation of ore, discarded metal objects are often mixed in. When these objects pass over the electromagnetic iron removers installed above the conveyor belts, they cannot be effectively removed due to the relatively weak magnetic force of the removers and the metallic properties of the manganese steel materials. Consequently, these metal objects enter the crusher mixed with the ore and slurry, causing frequent "tramp iron" events. This results in repeated impacts on components like the main shaft. The fatigue damage accumulated in the main shaft from these impacts is the primary cause of main shaft fracture.
Preventive Measures:
1. Maintenance personnel on site must retrieve all discarded components replaced during cone crusher repairs and place them in designated areas. Strictly prohibit the indiscriminate disposal of any metal waste into the ore. 2. When conducting equipment inspections and repairs, maintenance staff in the concentrator plant must strictly adhere to operational procedures to avoid leaving tools or foreign objects inside the machinery. 3. Upgrade or modify the existing metal detectors¡ªeither through procurement or by leveraging in-house technical expertise¡ªto enhance their capability in detecting and removing metallic objects. 4. Operators overseeing the crusher's feed conveyor should strengthen their sense of responsibility, increase the frequency of material inspections, and promptly remove any foreign objects detected. 5. Jaw crusher operators must perform timely and thorough equipment inspections. Any abnormalities, such as unusual currents or noises, should be addressed and reported immediately to prevent incident escalation. 6. Regularly perform non-destructive testing (e.g., ultrasonic inspection) on stress-bearing components like the main shaft to assess the actual condition of the jaw crushing equipment. 7. Enhance training for operators across all sections, improve their practical operational skills, and reinforce equipment maintenance. Ensure major and medium repairs are carried out promptly and thoroughly to keep the equipment in sound technical condition.
For critical components¡ªsuch as the main shaft, the crusher body, and other parts that can impact the entire production system¡ªsecure inventory of necessary spare parts in advance to avoid plant-wide shutdowns in case of unexpected failures.
|