News articles

Details

How to reduce dust pollution in crusher production lines

People who have been in contact with the crushing production line industry know that the crushing production site is always dusty and the environment is harsh. The dust generated during the crushing process spreads into the air with the airflow, not only causing serious pollution to the environment, but also posing a threat to the physical health of workers. Therefore, reducing dust pollution in the crusher production line is very necessary and also a responsibility that enterprises should have.

So, where do these large amounts of dust come from? One part is carried by the ore itself, and the other part is generated during the ore crushing process. In addition, in the crushing production line, the places where the material falls due to feeding hoppers, protective covers, chutes, etc. are the most prone to generating dust. Once we understand the source of dust, we can take targeted measures.

Usually, there are two measures to control the dust on the crusher production line: one is to use external forces to control the source of dust and avoid its diffusion, and the other is to improve the local structure of equipment such as crushers. The specific measures include the following aspects:

1. Install sprinkler systems, vacuum cleaners, and sealing covers at the source of dust.

Choose to install two water spray devices at the inlet, outlet, and crushing chamber of the crusher. The two water spray heads at the feeding port point towards the feeding port; The two nozzles at the discharge outlet form a certain angle relative to each other, so that the sprayed water is in a cross state to achieve the best effect.

Install suction devices at the discharge port and the maintenance port of the crusher equipment. The vacuum hood of the discharge port should be installed about 1000mm away from the discharge port, and the plane of the vacuum hood should be perpendicular to the direction of dust flow; The connection between the vacuum hood of the maintenance port of the crusher equipment and the fan can be designed as a scalable pipeline, which facilitates refueling and daily maintenance of the crusher.

2. The structure can be renovated and optimized in areas with large slopes such as feed hoppers, protective covers, and chutes.

Specific methods: Firstly, reduce the inclination angle of the chute to reduce the height potential energy difference of the material; The second is to improve the structure of the crusher, while keeping the overall size of the equipment unchanged, increasing the number of teeth on the toothed plate and relatively reducing the tooth shape.

3. In addition to the above two aspects, unreasonable process flow and blockage of sieve plates can also lead to an increase in dust. Therefore, it is necessary to adopt advanced and environmentally friendly production processes and equipment as much as possible for production, and to use enclosed conveying methods as much as possible during material transportation. In addition, it is necessary to clean the sieve in a timely manner to prevent blockage, so that a portion of small particles and dust can be screened out before the material enters the crusher.


£¨+86£©138-4494-4528

53-3 Honghai Road, Yuhong District, Shenyang City, Liaoning Province, China

Navigation

Mobile official website

Copyright @ 2023 .  Shenyang Fente Mining Machinery Co., Ltd .  All rights reserved.   |   ÁÉICP±¸2023009852ºÅ-1

Technical Support£º ÐÅÍø¿Æ¼¼ | Admin Login
seo seo